Automated homing radio station PARSEK-MF”

MF automated homing radio station is intended for aircrafts homing to aircraft carrying ships and floating platforms. Certificate type No.159 of IAC commission dd. 27.08.1999

Area

Send request

Purpose of the equipment

A full set of radio station:

– 1 rack with automated homing radio station rack
– Antenna- tuning unit
–UPS

Containerized version is available.
On delivery a complete set of radio station the automatic redundancy is provided.

The control circuit comprises::

– "Parsek-M" radio stations
– marker radio beacons

Automated homing radio station "Parsek-M" can also include:

– far homing antenna-feeder device
– near homing antenna-feeder device
The station can be located at a distance up to 100 m from the antenna.

Main technical characteristics:

Operating frequency range	250–1500 kHz
Frequency setting increment (retuning to any frequency within the range without manufacturer assistance)	1 kHz
Transmitter output carrier power	1000 W
Transmitter maximum peak power for all emission classes	1000 W
Emission classes	А1А, А2А, А3Е, А3Е+А2А, F1B
Modes: «Homing» (A2A class emission), «Transmission» (A3E class emission)	provided
Automatic delivery of one-, two-, three- letter Morse code signals at rate of 7 words per minute for “Homing” mode in A2A emission class.	provided
Frequency of modulating tone signal in А2А emission class	1020±50 or 400±25 Hz
Audio frequency band in А3Е emission class	0.3–3.4 kHz
Maximum modulation depth in А3Е emission class	95%
Frequency shift in F1B in emission class	125, 170, 250 Hz
Maximum rate of telegraph operation in А1А, F1B emission classes	100 Baud
Mains power supply	380 V, 50±2 Hz
Consumption at radiated power 1000W	no more 2000 VA
Control and monitoring: – local – remote	provided provided by audio frequency radial serial transmission interface
Automatic frequency control when changing antenna parameters depending on a changing environmental operating conditions	provided
Can operate with any antenna which input impedance parameters are : XA from -1600 to +300 Ohm, RA from 0.3 to 10 Ohm	provided
Overall dimensions (height x depth x width) : – transmitter rack – remote-controlled antenna circuit	1138х650х570 mm 1850х646х678,5 mm