Controlled static converter USP-4/4-115

Controlled static converter USP-4/4-115

Controlled static converter USP-4/4-115
Controlled static converter USP-4/4-115 is designed for powering ship hull degaussing systems.

Area

Main technical characteristics:

Rated output parameters at rated gate current ±5 mA and rated input resistance Rinp.rat. = (500±50) Ohm:
– output voltage
– output current

115 В
± 4 А
Maximum consumed power no more than 600 VA at power factor no less than 0.9
Output current ripple factor no more than 0.05%
Power supply from three-phase AD mains 380±19 V,50 Hz without neutral wire
Single phase shield triggering current through resistor 1 kOhm no more than 20 мА
Control signal processing:
– at halt
– on move

accuracy no more than ±1,5% from Ioutp.rat
accuracy no more than ±3% from Ioutp.rat
Possibility to set rated output current (Ioutp.rat) from 1 to 5 mA
Possibility of manual setting of the DC output component within Ioutp.rat separately or simultaneously with the control signal at the input
Control system Output current and voltage display, alarm signaling
Cooling natural air cooling
Weigh no more than 50 kg
Dimensions (HxWxD) 472х318х326 mm
Exploitation conditions according to GOST RV20.39.304-98