HF automated adaptive radio communications mobile center

Mobile HF center of automated adaptive radio communication (built around the R-140M radio) is designed to organize duplex or simplex communication channels in the radio link or radio network.

AA CTM placed in the back of the car is used as part of the mobile communication center.

The body and car models are changeable upon customer requests.

Area

Send request

Features:

• full automation of communication establishment and maintaining
• multiparametric adaptation depending on propagation conditions and interference through deliberate change of the operating frequency, data rate in the range from 300 to 9600 bit/s and code rate from 0.4 to 0.8
• data transmission in real-time at the rates 1200 and 2400 bps. via interface S1-FL-BI
• automatic link establishment during communication taking into account the current propagation conditions and signal interference environment through active channel route sounding at the stages of communication establishment and maintaining
• high reliability of data transmission (at most one distorted sign per billion transmitted signs) through the use of error-correcting codes and automatic repeat request of distorted information
• operation in automated radial type radio network
• automatic remote control of the transmitter and receiver and reliable visual control (monitoring) of their technical condition and operation
• advanced tools of information cryptographic protection in asynchronous mode during data transmission
• radio communication both at parking places and while moving
• radio communication between the same type radios and old park radios
• able to interface with local computer networks and automated control systems
• automatic log keeping
• automatic synchronization with standard time signals received from satellite systems GPS and GLONASS satellite system or by State Service of Time and Frequency standard time signals in HF stations network

Types of provided communication

· Data transmission

· Telephone communication

· Telegraph communication

Transmitting antennas:*

- symmetrical sloper antenna 2х40 m (1.5 – 5 МHz)
- symmetrical sloper antenna 2x11 m (5 – 16 МHz)
- V-shaped antenna 2x46m (10-30 МHz)
- sloping T-shaped antenna 2x40m (1.5 – 2 МHz)
- sloping T-shaped antenna 2x11m (1.5 – 2 МHz)
- 4m whip antenna (14 – 30 МHz)
- 10m whip antenna (5 – 14 MHz)
- Λ-shaped antenna (20 – 30 MHz)

Receiving antennas: *

- symmetrical sloper antenna 2×11 m (1.5 – 16 MHz)
- V-shaped antenna 2х46 м (10 – 30 MHz)
- 4 m whip antenna (1.5 – 30 MHz)
- Λ-shaped antenna (20 – 30 MHz)

* Antenna types and their quantity vary according to customer requirements.

Radio center includes:

• 1 kW transmitter
• Control and signal processing device
• PТ-100PRM receiver
• Radio relay set *
• VHF radio *
• Terminal equipment*
• Antenna-feeder devices for general and long distance communication

* Might vary according to customer requirements.

Main technical characteristics:

Operating frequency range	1,5-30 МHz
Communication distance: – static – mobile	up to 2000 km up to 300 km
Output power	1000 W
Sensitivity - in telephone mode - in telegraphy mode	More than 0.65 µV More than 0.25-1.0 mkV
User-programmable channels	100
Programmed channel hopping time	Less than 60 ms
Power levels	100%, 50%, 25%
Classes of emission	Rx: A1A, F1В, G1B, J3Е, A3E, H3E, R3E, J7B, J2D Tx: A1A, F1В, G1B, J3Е, A3E, H3E, R3E, B7D (USB+LSB), J7D, J7B, J2D
Data rate (text massages and files)	from 300 to 9600 bps
Data rate (voice)	1200, 2400 bps
Power supply	- built-in - 3 phase, 380 V, 50 Hz
Power consumption	Less than 3 kW