|
Transmission mode |
|
| Classes of emission |
H3E, R3E, B7D, X9D, J3E, A1A, G1B, F1B, J7B |
Control:
– local
– remote
|
From the front panel
provided by audio RS-232С, Enternet,others on request
|
| Industrial efficiency |
25% |
| Mains supply |
220 V, 50 Hz |
| Power gradations |
10%, 25%, 50%, 100% |
| Operating frequency range |
1.5-30 MHz |
| Rated output power |
100 W |
| Non-linear distortions of the transmitting path |
no more that minus 36 dB PEP |
|
Number of programmable frequencies |
1000 |
| Programm frequency tuning time |
no more than 50 ms |
| TWR of the antenna feeder device at which tuning to antennas is provided |
no more than 0.2 |
|
Operability on antennas with any IPV |
provided |
| Reception mode |
|
|
Operating frequency range |
0.4-30 MHz |
Signal reception sensitivity:
- in J3E mode (at a signal/noise ratio of 10 dB)
- врежиме F1B
|
no worse than 0.97 µV
no worse than 0.6 µV
|
| Number of programmable frequencies |
1000 |
| Power consumption in the reception mode |
no more than 60 W |
| Consumption in transmission mode |
no more than 1000 W |
| Reception mode |
|
Signal reception sensitivity:
– in J3E mode (at a signal/noise ratio of 10 dB)
– врежиме F1B (TF-170)
|
no worse than 1.2 µV
no worse than 0.6 µV
|
| Time of tuning to any frequency |
no more than 80 ms |
| Number of programmable frequencies |
100 |
| Power consumption in the reception mode |
no more than 60 W |
AGC response time in J3E mode::
– in signal increase
– in signal decrease <0.02В
|
3 ms
2 s
|
| AGC dynamic range |
no less than 90 dB |
| Design data |
|
| The transceiver is performed in version «Euromechanics 19"» |
|
| Antenna-matching device |
Built-in |
| Dimensions transceiver (WxDxH) |
465х540х150 mm |